PE Electro Fusion EF Band For Metal Reinforced Corrugated Pipe

PE Electro Fusion EF Band For Metal Reinforced Corrugated Pipe Sturcture of EF Band HDPE sheets embed with nicochrome net by heating. Application Connection of Steel Reinforced Corrugated Pipes. Features 1. The EF band are specially cut in to narrow piece to fit for trough of wave of SRCP, EF...

Product Details

PE Electro Fusion EF Band For Metal Reinforced Corrugated Pipe

Sturcture of EF Band
HDPE sheets embed with nicochrome net by heating. 
80510100526.jpg


Application
Connection of Steel Reinforced Corrugated Pipes. 

Features
1. The EF band are specially cut in to narrow piece to fit for trough of wave of SRCP, EF band is welded along with cutting edge of two pipes, ensuring strenght of joint. 

2. EF band is made by the same material as that of SRCP, the same material and melt flow rate ensures good result of sealing.

3. EF band is light and could be easily operated by setting parameters on adjstment instruments. 

Installing/Operation
We can support with our customers two connection methods of SRCP, 
1. " Inside welding, outside EF band"
2. " Inside welding, outiside HSS",regarding information of heat shrink sleeve connection, we will introduce it separately in other chapter. 

"Inside welding, outside EF band" means from inside of pipes, we use hand extrusion welder (For its more information please contact me) to weld seam of two pipes; here we talk about big pipes that workers can come inside, for small pipes, no need weld from inside. From outside we use EF band to melt connect it. 
0510100503.jpg


Performance:
1. Waterproof;
2. Able to withstand axial forces initiated by axial movements of the pipe in the ground;
3. Able to withstand radial forces and bending moments;
4. Able to withstand effects of temperature and temperature variations.
5. Have the same thickness of the line pipe insulation layer.

Specification
Metal reinforced polyethylene spirally corrugated pipe diameterSize Length× Width× Thickness
DN6002184× 50× 7
DN7002197× 50× 7
DN8002850× 60× 7
DN9003200× 60× 7
DN10003500× 60× 7
DN11003650× 60× 9
DN12004030× 70× 9
DN13004432× 70× 9
DN14004750× 70× 9
DN15005000× 70× 9
DN16005287× 70× 9
DN18005915× 70× 9
DN20006542× 70× 9

 

180510100615.jpg






Technical Data:
All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997
Final TestUnitStandardTest ResultResult
Raw material densityg/cm 3≥0.935≤0.961PASS
Raw material melt flow rateg/10min≤0.500.46PASS
Appearance check/Inernal and external surfaces is clean and free from other defects.PassPASS
Heat reversion%≤3;shall not show any cracks0.89,No cracksPASS
Tensile yield strengthMpa≥1920.2PASS
Elongation at break%≥350656PASS
Stress crack resistanceh≥300PassPASS

 

Huashida Machinery, with over 14 years' experience, is one of the professional pe electro fusion ef band for metal reinforced corrugated pipe manufacturers in China. Offering the customized service, we warmly welcome you to get the high qualified products from our factory.






Technical Data:
All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997
Final TestUnitStandardTest ResultResult
Raw material densityg/cm 3≥0.935≤0.961PASS
Raw material melt flow rateg/10min≤0.50
0.46PASS
Appearance check/Inernal and external surfaces is clean and free from other defects.PassPASS
Heat reversion%≤3;shall not show any cracks0.89,No cracksPASS
Tensile yield strengthMpa≥1920.2PASS
Elongation at break%≥350656PASS
Stress crack resistanceh≥300PassPASS






Technical Data:
All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997
Final TestUnitStandardTest ResultResult
Raw material densityg/cm 3≥0.935≤0.961PASS
Raw material melt flow rateg/10min≤0.50
0.46PASS
Appearance check/Inernal and external surfaces is clean and free from other defects.PassPASS
Heat reversion%≤3;shall not show any cracks0.89,No cracksPASS
Tensile yield strengthMpa≥1920.2PASS
Elongation at break%≥350656PASS
Stress crack resistanceh≥300PassPASS




Technical Data:
All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997
Final TestUnitStandardTest ResultResult
Raw material densityg/cm 3≥0.935≤0.961PASS
Raw material melt flow rateg/10min≤0.50
0.46PASS
Appearance check/Inernal and external surfaces is clean and free from other defects.PassPASS
Heat reversion%≤3;shall not show any cracks0.89,No cracksPASS
Tensile yield strengthMpa≥1920.2PASS
Elongation at break%≥350656PASS
Stress crack resistanceh≥300PassPASS




Technical Data:
All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997
Final TestUnitStandardTest ResultResult
Raw material densityg/cm 3≥0.935≤0.961PASS
Raw material melt flow rateg/10min≤0.50
0.46PASS
Appearance check/Inernal and external surfaces is clean and free from other defects.PassPASS
Heat reversion%≤3;shall not show any cracks0.89,No cracksPASS
Tensile yield strengthMpa≥1920.2PASS
Elongation at break%≥350656PASS
Stress crack resistanceh≥300PassPASS
Technical Data:
All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997
Final TestUnitStandardTest ResultResult
Raw material densityg/cm 3≥0.935≤0.961PASS
Raw material melt flow rateg/10min≤0.50
0.46PASS
Appearance check/Inernal and external surfaces is clean and free from other defects.PassPASS
Heat reversion%≤3;shall not show any cracks0.89,No cracksPASS
Tensile yield strengthMpa≥1920.2PASS
Elongation at break%≥350656PASS
Stress crack resistanceh≥300PassPASS





Technical Data:
All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997
Final TestUnitStandardTest ResultResult
Raw material densityg/cm 3≥0.935≤0.961PASS
Raw material melt flow rateg/10min≤0.50
0.46PASS
Appearance check/Inernal and external surfaces is clean and free from other defects.PassPASS
Heat reversion
%≤3;shall not show any cracks0.89,No cracksPASS
Tensile yield strengthMpa≥1920.2PASS
Elongation at break%≥350656PASS
Stress crack resistanceh≥300PassPASS





Technical Data:
All of test according with the EN253-2003,ISO1183-2004,ISO6964-1986,EN728-1997
Final TestUnitStandardTest ResultResult
Raw material densityg/cm 3≥0.935≤0.961PASS
Raw material melt flow rateg/10min≤0.50
0.46PASS
Appearance check/Inernal and external surfaces is clean and free from other defects.PassPASS
Heat reversion
%≤3;shall not show any cracks0.89,No cracksPASS
Tensile yield strengthMpa≥1920.2PASS
Elongation at break%≥350656PASS
Stress crack resistanceh≥300PassPASS
Specification
Metal reinforced polyethylene spirally corrugated pipe diameterSize Length× Width× Thickness
DN6002184× 50× 7
DN7002197× 50× 7
DN8002850× 60× 7
DN9003200× 60× 7
DN10003500× 60× 7
DN11003650× 60× 9
DN12004030× 70× 9
DN13004432× 70× 9
DN14004750× 70× 9
DN15005000× 70× 9
DN16005287× 70× 9
DN18005915× 70× 9
DN20006542× 70× 9
Specification
Metal reinforced polyethylene spirally corrugated pipe diameterSize Length× Width× Thickness
DN6002184× 50× 7
DN7002197× 50× 7
DN8002850× 60× 7
DN9003200× 60× 7
DN10003500× 60× 7
DN11003650× 60× 9
DN12004030× 70× 9
DN13004432× 70× 9
DN14004750× 70× 9
DN15005000× 70× 9
DN16005287× 70× 9
DN18005915× 70× 9
DN20006542× 70× 9

Specification
Metal reinforced polyethylene spirally corrugated pipe diameter
Size Length× Width× Thickness
DN6002184× 50× 7
DN7002197× 50× 7
DN8002850× 60× 7
DN9003200× 60× 7
DN10003500× 60× 7
DN11003650× 60× 9
DN12004030× 70× 9
DN13004432× 70× 9
DN14004750× 70× 9
DN15005000× 70× 9
DN16005287× 70× 9
DN18005915× 70× 9
DN20006542× 70× 9

  

 

Inquiry