Pipeline Weld Joints Heat Shrink Sleeve

Pipeline Weld Joints Heat Shrink Sleeve Introduction PE heat shrinkable tape (sleeve) is composed of cross-linked polyethylene back and special heat melt adhesive. Heat melt adhesive has good bonding with PE back, steel pipe and Fusion bonded epoxy (FBE layer). By heating PE back shrinks,...

Product Details

横幅-创新以远.jpg

Pipeline Weld Joints Heat Shrink Sleeve


Introduction
PE heat shrinkable tape (sleeve) is composed of cross-linked polyethylene back and special heat melt adhesive. Heat melt adhesive has good bonding with PE back, steel pipe and Fusion bonded epoxy (FBE layer). By heating PE back shrinks, adhesive layer melts, and closely wraps around pipe joints, then it forms together with FBE a firm and continuous anti-corrosion body. It is resistant to corrosion, wear, impact, UV and aging, easier to be operated. 

热收缩套1.jpg 微信图片_20180329143331.jpg

Wraparound products
Application area:
It is mainly used for wrapping around pipe, anti-corrosion of kinds of pipe joints, and repairing pipes.
For example: Oil and gas pipe, PU insulation pipe, 3PE/2PE steel pipe.
用途:塑钢管.jpg

用途:检查井.jpg

用途:PVC.jpg 
 
                           CONSTRUCTION CASE
Heat shrinkable sleeve for Oil & Gas Pipe 

用途:3PE管.jpg

Heat shrinkable sleeve forThermo Insulated Pipe

热收缩套施工1.jpg

 TECHNICAL PARAMETERS

NOText ItemUnitPerformanceText ResultText Metho
Back Material
1Tensile StrengtMPa1719.47ASTM D638
2Elongatio%400626ASTM D638
3Vicat Softening PoinºC9092ASTM D1525
4Brittleness TemperaturºC<-65<-65ASTM D2671C
5Dielectric StrengtMV/m2533.13ASTM D149
6Volume ResistivitΩ.m1*10131.1*1013ASTM D257
7Environment Stress Crach1000>1000GB/T1842
 
 
8
 
Chemical
resistance
(7d
10%
HCI
Tensile strengthMPa85104.9ASTM D638
Elongation%8596.3ASTM D638
10%
NaAH
Tensile strengthMPa85102.1ASTM D638
Elongation%8595.6ASTM D638
10%
NaCL
Tensile strengthMPa85108.3ASTM D638
Elongation%8594.1ASTM D638
9Thermal aging
(150ºC,168h
Tensile strengthMPa1420.7ASTM D638
Elongation%300630ASTM D638


NO.Text IteUniPerformancText ResulText Metho
Adhesive
1Softening PoinºC9090.1ASTM E28
2Brittleness TemperaturºC<-15<-15ASTM D2671C
3Lap SheaMPa1.01.5ASTM D1002
 
4
Peel Strength
(22ºC
SteelN/cm70145.6ASTM D1000
PrimerN/cm70205.9ASTM D1000
PE layeN/cm70190.0ASTM D1000
Non-solvent Epoxy Primer
5Shear of cured primerMPa5.012SY/T0041


We are also producing machine of heat shrinkable sleeve, You are welcom to ask for more information. 

2.jpg

横幅-认证图标.jpg

Huashida Machinery, with over 14 years' experience, is one of the professional pipeline weld joints heat shrink sleeve manufacturers in China. Offering the customized service, we warmly welcome you to get the high qualified products from our factory.
Inquiry