Thermal Insulating Jacket Pipe Extrusion Line

Thermal Insulating Jacket Pipe Extrusion Line ---Pipe diameter range: 365-760mm 500-960mm 855-1380mm 960-1680mm ---The extrusion line comprise equipments and devices as below, 1set Vacuum loader 1set Hopper dryer 1set High-effeciency single screw extruder 1set 25/25 single screw extruder for...

Product Details

横幅-创新以远.jpg

Thermal Insulating Jacket Pipe Extrusion Line

---Pipe diameter range: 365-760mm 500-960mm 855-1380mm 960-1680mm
---The extrusion line comprise equipments and devices as below,

2.jpg

1set Vacuum loader
1set Hopper dryer
1set High-effeciency single screw extruder
1set 25/25 single screw extruder for mark line
1set Vacuum calibration table
1set Water spraying tank
1set Hauling machine
1set Cutting machine
1set Stacker

I. Pipe Usage
---HDPE jacket pipe is out case of thermal insulating pipe, which is widely used in central heating, oil, nature gas and other industrial area.

保温管设备细节_副本.jpg

II. Machine Advantages

---High-efficiency extruder gives larger output, stable performance.
For example
SJ90/33---600-700kg/h
SJ120/33---800-900kg/h
SJ150/33---1000-1200kg/h
---Compared with inflating method (internal pressure method)
1. For 24 hours working, it reduces 2-3 workers for each shift.
2. There is much waste pipe and material, no need workers to crush waste material.
3. High-effeciency. Take Dimater 960mm as an example, Output is approximately 60 PCS of 11.6meters pipe, it is much higher output than that of inflating method.
4. Pipe wall is average and smooth, to reduce waste of raw material, and pipe thickness is adjustable.
5. No need trim edge, once forming.

IMG_6421.jpg

III. Main machine- High-effeciency single screw extruder
---Single screw is with barreir & mixing head; Barrel is new model with slotting (channel), Both make security of good jellification, large output and stable performance.

20120315729.jpg

IV. Controlling system
The complete line could be controlled by PLC, with good human-machine interface, all technical parameters could be set and indicated by touching screen. Controlling system is designed according to the customer; S requirement, to be with PLC, or without.

IMG_4914.jpg

V. Electrical system
---ABB frequency converter or EUROTHERM speed controller
---Japan RKC temperature controller
--- Siemens AC contactors

IMG_4894.jpg

StylePE-365/760PE-420/960PE-850/1372PE-960/1680
Main extruder SJ-90/33SJ-90/33SJ-120/33SJ-150/33
Pipe diameter Φ365-960mmΦ 420-Φ 960 mmΦ 850-Φ 1372 mmΦ 960-Φ 1680mm
Capacity 550-700kg/h550~700 kg/h700~900 kg/h 800-1200kg/h
Installed power 360kw380 kw440 kw 580kw
Length 35m36 m40 m 48m

横幅-认证图标.jpg

Huashida Machinery, with over 14 years' experience, is one of the professional thermal insulating jacket pipe extrusion line manufacturers in China. Offering the customized service, we warmly welcome you to get the high qualified products from our factory.
Inquiry